Difference between revisions of "SCORE parameter exercises"

From CCARH Wiki
Jump to navigation Jump to search
Line 19: Line 19:
  
 
*    Note offsets for the multiple voices in this example are altered with P10 of code 1 items (notes).
 
*    Note offsets for the multiple voices in this example are altered with P10 of code 1 items (notes).
*    The dashed line is input in command mode as a dashed line (P1=4 for lines).
+
*    The dashed line is input in command mode as a dashed line (P1=4 for lines).  Try the command "DASH 2".
  
 
==Example 2==
 
==Example 2==

Revision as of 22:22, 13 February 2013


Here are some more short musical samples to do as an exercise to become familiar with SCORE's parameters after doing this set of simpler exercises. These exercises focus on editing object parameters after the basic musical structure has been input into the SCORE editor in the user input mode.

Input and do edit adjustments on the following 10 examples. You should refer to the SCORE Reference Manual and the SCORE parameter table. Also, you can get brief explanations of each parameter for an item when editing it by pressing the F1 function key in the SCORE program. Brief visual summaries of the parameters are available online for the more complicated item types: notes (P1=1) and slurs (P1=5).

While doing each exercise, make a brief list of parameters you needed to alter in order to typeset each exercise that you do. Turn this list in with your completed exercises. For example to horizontally offset notes in exercise #1 below, you should alter P10 of the notes to offset them from the default time position. Another example would be which parameter for line codes needs to be changed to get a dashed line as seen in example #1 and what value indicates a dashed line rather than a solid line?

Here is a PDF file with the exercises already typeset: hardscore.pdf.


Example 1

Buxtehude exercise.

Buxtehude.svg

Hints:

  • Note offsets for the multiple voices in this example are altered with P10 of code 1 items (notes).
  • The dashed line is input in command mode as a dashed line (P1=4 for lines). Try the command "DASH 2".

Example 2

Cross-staff beaming.

Xstafff.svg


Hints: This is a tricky example to accomplish even though it looks easy.

  • Input all of the musical notes on the bottom staff.
  • Use the S+ and S0 (S-zero) in input mode to move the notes temporarily to the upper staff and then back again to the original staff.
  • Use the STUD command to align the stems (see manual).
  • Put invisible rests in the top staff (one for each measure). The durations of the eighth notes are probably best represented by triplet eighths (TE in rhythm-stage). If so, then the two invisible rests have a duration of 7 quarter notes.
  • The repeat brackets above the measures were entered with a blank middle, then some text was manually added to generate the 2X marking.
  • The word sempre has to be added as a text item (using font _02 for italic); likewise for "Ped. sempre".

Example 3

Chopin Mazurka.

ChopinMazurka.svg

Hints:

  • The small notes are cue-sized notes which can be entered in user input mode with the commands Q+ and Q-.
  • The duration of the small notes are quintuplet sixteenth notes, which occur 20 times in a whole note (they are not grace notes).
  • The duration of graces notes is indicated in the rhythm stage with a "G".
  • The numbers near the beams are tuplet numbers. Search for the parameter used to specify a "number over a beam" either in the SCORE reference manual, the parameter matrix, or by pressing F1 while editing the beam to view the parameter list and help for the beam item.

Example 4

Liber usualis. There are several was to typeset this example in SCORE. A simple method would be to change the notehead shape to the visual display below for each neume. The JT command can be used to space the text correctly after notes and text have been entered.

Liberusualis.svg

Hints:

  • Add a blank 4-line staff, then position the text next, then position the neumes last.
  • Neumes can be entered either as code 9 items (symbols) or as code 1 items (notes) with special shapes for the note heads and no stems.
  • The barline in the middle of the staff has non-default start and stop points.

Example 5

Edvard Grieg


Grieg.svg


Hint:

  • In user input mode "S+" is used to position notes one staff above the current staff; "S0" moves notes back to the current staff.
  • Occasional secondary voice notes/rests can be added manually, or added as a second pass of data entry on the staff (either using invisible rests which are not recommended, or rests as rhythm placeholders to delete later).
  • Grace notes have the duration "G" in the rhythm-stage.
  • Use "DIm" in the marks-stage to place the dim. (diminuendo) mark (typically attached to the second staff).
  • In measure 3, the rests can be entered in the pitch-stage as RD (rest down). Or these rests can be inserted in command mode "REST 2 100" for adding a quarter rest to the middle of the second staff. Then move the rest near a note it comes under and then type "CN" while editing the rest to center it exactly under the note.
  • The staccatos on the stem side of notes can be entered as "-S" in the marks-stage of user input. Otherwise they have to be moved manually above the beams using P14 of the note. It is possible to do this visually rather than guessing at the vertical accent offset values.
  • Horizontal adjustment of the articulations (staccatos) should be done with P13 of the note.

Example 6

Liszt Consolation.

Liszt.svg

Hints:

  • For the first slur on the top staff, use the slur-stage numbers "0 1", where 0 means it goes off to the left across the system break.
  • For the second slur on the top staff, use the slur-stage numbers "3 99", where 99 means it goes off to the right across the system break.
  • Type "ARP 2 150" to place an arpeggio roughly where it should be place in the music. Use F4 and F5 with the and arrow keys to adjust the height of the arpeggio. The LJ command should be (re)run after the arpeggio mark has been positioned near the notes it applies to.
  • The whole-note in measure 3 could be either added in several ways:
    1. with a second pass on the bottom staff in user-input mode (using a temporary rest with duration WW which you can delete later)
    2. As an invisible rest with duration WW (not recommended).
    3. a copy of a nearby eighth-note which the notehead shape changed to a whole note (P6=2), and optionally the duration changes to 4 quarter notes (P7=4).

Example 7

Another one of Pachelbel's other works.

Pachelbel.svg

Hints:

  • Check the usage of P8 for beams to create the tricky beam break in the third measure.

Example 8

Campion tablature.

Campion.svg

Hints:

  • Similar to example 9

Example 9

Schoenberg.svg

Hints:

  • The top two lines should be justified independently from the bottom line.
  • P7 on the last note of the P-0 tone row on the bottom staff should be given a duration of 2 rather than 1 so that there is an extra spacing gap before the next tone row.

Example 10

Richard Strauss.

RichardStrauss.svg

Hints:

  • The 32nd note markings are for tremolos which are indicated as beam items.